51.2V 100Ah LiFePO4 Battery
Premium Series Rack Mounted
Description
51.2V 100Ah LiFePO4 Lithium Iron Phosphate, Premium Series, Rack Mounted Battery Module - Designed for backup power applications.
51.2V 100Ah LiFePO4 Lithium Iron Phosphate, Premium Series, Rack Mounted Battery Module - Designed for backup power applications.
The battery module is integrated with an internal intelligent BMS and provides big advantages on safety, cycle life, energy density, temperature range, and environmental protection.
This product specification describes the type, size, structure, electrochemistry performance, service life, and BMS characteristics.
Overview
This product specification describes the type, size, structure, electrochemistry performance, service life, and BMS characteristics.
Overview
Nominal Voltage: 51.2A
Dimension (W*D*H),mm: 442* 470* 155mm
Charging Voltage: 56.0V-57.0V
Discharging Voltage: 43.2V
Max constant current: 100A
Max constant discharge: 100A
Charge range: 0℃~45℃
Discharge range: -20℃-55℃
Storage range: -20℃-45℃
Built-in BMS: Voltage, current, temperature, Management & Cell balance
Communication protocol: RS485, CAN communication
Design life: >10years
Cycle life: >6000times, 80%DOD, 25℃
Battery Module
The battery module consists of individual LFP cells, wire, intelligent BMS, all contained within a sturdy metal case enclosure.
The module consists of 16 x 100Ah A Grade high-performance LFP cells which provide, long life, safety, and a wide operating temperature range.
High energy density, small size, lightweight, no pollution.
Packaged within a sturdy single-cell enclosure, offering fire retardant wire, laser welded copper bus bar connections, making the battery stable, safe and durable.
Built-in commercial-grade intelligent BMS, that constantly monitors battery and cell voltage, current, temperature, and the overall health of the battery module.
LED indicates the battery SOC and operating status.
19 inches metal module container rack, simple installation and expand capacity by parallel.
Flexible customization of dimensions
10 years design life, Stable performance, maintenance-free.
Packaged within a sturdy single-cell enclosure, offering fire retardant wire, laser welded copper bus bar connections, making the battery stable, safe and durable.
Built-in commercial-grade intelligent BMS, that constantly monitors battery and cell voltage, current, temperature, and the overall health of the battery module.
LED indicates the battery SOC and operating status.
19 inches metal module container rack, simple installation and expand capacity by parallel.
Flexible customization of dimensions
10 years design life, Stable performance, maintenance-free.
BMS specification
BMS provides complete management and protection for the battery.
Voltage warning and protection for module and each single cell.
Current warning and protection and the maximum operating current can be customized.
Temperature warning and protection, 4 sensors for the battery pack, and 1 sensor for BMS.
Battery module SOC and SOH calculation, display the accurate battery status.
Communicate with the SMPS or monitor device, report the battery data.
Pre-charge/discharge logic, make sure safety charge for the module if under low voltage condition.
Switch-off mode, sleep mode, and operating mode, a different mode for different conditions.
Description
51.2V 100Ah LiFePO4 Lithium Iron Phosphate, Premium Series, Rack Mounted or Stackable Battery Module - Designed for off-grid or backup power applications.
The battery module is integrated with an internal intelligent BMS which provides huge advantages on safety, life cycle, energy density, temperature range, environmental protection, and most importantly provides excellent redundancy.
This product specification describes the type, size, structure, electrochemistry performance, service life, and BMS characteristics.
Overview
- Nominal Voltage: 51.2V
- Dimension (W*D*H),mm: 442* 470* 155mm
- Charging Voltage: 56.0V-57.0V
- Discharging Voltage: 43.2V
- Max constant current: 100A
- Max constant discharge: 100A
- Charge range: 0℃~45℃
- Discharge range: -20℃-55℃
- Storage range: -20℃-45℃
- Built-in BMS: Voltage, current, temperature, Management & Cell balance
- Communication protocol: RS485, CAN communication
- Design life: >10years
- Cycle life: >6000times, 80%DOD, 25℃
Battery Module
The battery module consists of individual LFP cells, wire, intelligent BMS, all contained within a sturdy metal case enclosure.
- The module consists of 16 x 100Ah A Grade high-performance LFP cells which provide, long life, safety, and a wide operating temperature range.
- High energy density, small size, lightweight, no pollution.
- Packaged within a sturdy single-cell enclosure, offering fire retardant wire, laser welded copper bus bar connections, making the battery stable, safe and durable.
- Built-in industrial-grade intelligent BMS, that constantly monitors the cell voltage, current, temperature, and the overall health of the battery module.
- Built-in battery monitor with LCD Screen.
- LED's indicates the battery SOC and operating status.
- 19 inches metal module container rack, simple installation and expand capacity by parallel.
- Flexible customization of dimensions
- 10 years design life, Stable performance, maintenance-free.
BMS specifications
BMS provides complete management and protection for the battery.
- Voltage warning and protection for the module and each individual cell.
- Current warning and protection. (Maximum operating current can be customized).
- Temperature warning and protection, 4 sensors for the battery pack, and 1 sensor for BMS.
- Battery module SOC and SOH calculation displays the accurate battery status.
- Communication with the SMPS or monitoring devices, to report the battery data.
- Pre-charge/discharge logic, to protect the module under low voltage conditions.
- Switch-off mode, sleep mode, and operating mode, a different mode for different conditions.